LIQUI MOLY / Ref. 3P-1508
Fully synthetic chain grease, extremely adhesive and water resistant. Excellent creep ability and lubrication behavior. Extremely effective and lasting on high-speed chains. Provides increased chain life and reduced elongation.
Fully synthetic formulation for initial lubrication or maintenance of drive chains. Excellent for use in dusty, dirty and corrosive operating conditions. For high load- and high-speed chains with and without O/X-rings.
Application
Use suitable chain cleaner before application. Spray Motorbike Chain Cleaner onto cleaned chain. Allow enough time for lube to penetrate and stabilize before use.
LIQUI MOLY / Ref. 3P-1604
Specially developed aerosol for wetting foam and fabric air filters. Dust and dirt are reliably trapped even under extreme operating conditions and engine damage is thus avoided. Guarantees an optimal air flow and thus maximum engine output. Suitable for use on all 2-stroke and 4-stroke motorcycles with air or water-cooled engines using foam or fabric air filters.
Application
First free the filter of coarse contaminants by knocking them out. Clean the air filter with LIQUI MOLY Motorbike Air Filter Cleaner (part no. 1299), wait for the solvent to evaporate and coat with Motorbike Air Filter Oil (spray). Before installing the air filter, allow it to air out for 10 to 15 minutes.
LIQUI MOLY / PACK 2 UNITS
High-performance motor oil based on synthetic technology. Ensures maximum performance and protection of the engine under all operating conditions. Optimum lubrication, outstanding engine cleanliness, excellent friction values and minimum wear are just as much par for the course as gentle clutch engagement and disengagement and gear shifting. Tested on engines with catalytic converters. Specially developed for air and water-cooled 4-stroke engines exposed to extreme loads off-road. For the sporty driver. Suitable for Enduro and motocross motorbikes, ATVs, SxS and snowmobiles with and without a wet clutch.
Approvals
API SN PLUS, JASO MA2
LIQUI MOLY / Ref. 3318
Makes assembly work easier, cleaner and safer. Removes oil, grease and dirt quickly and completely. Parts treated will be completely free of residues and fully degreased afterwards. Saves time and money and guarantees trouble-free repair work. Removes resin, oil and grease residues. Has excellent penetration properties as well as controlled evaporation, free of residues.
Universal cleaner for rapid cleansing and degreasing of small components in vehicle and industrial engineering. For brakes, clutches, transmissions, and for fitting and repair work. Removes oil and grease spots from floor coverings, materials and linings.
Application
Spray contaminated components and allow to drain. After the solvent has evaporated, the components will be clean and free of grease.
Note: Product may attack paints and plastic components. Check for material compatibility before using!
LIQUI MOLY / Ref. 3092
Synthetic formulation based on glycol ethers, alkyl polyglycols and glycol ether esters which guarantees full function even during extreme conditions. A higher wet and dry boiling point compared to DOT 3 and DOT 4 brake fluids and unique inhibitors provide corrosion and oxidation protection at high temperatures. Special scavengers are used to suppress steam at increased moisture levels.
For hydraulic systems that specify a fluid consistent with current product specifications. Observe the manufacturers instructions!
Approvals
FMVSS 116 DOT 3, FMVSS 116 DOT 4, FMVSS 116 DOT 5.1, ISO 4925 Class 3, ISO 4925 Class 4, ISO 4925 Class 5.1, SAE J 1703, SAE J 1704
